AMPO POYAM VALVES manufactures valves following any material specified on ASME B.16.34, such as:
• CARBON STEEL e.g.: WCB, WCC…
• ALLOY STEEL e.g.: WC1, WC6, WC9, C5, C12…
• CARBON STEEL FOR LOW TEMPERATURE e.g.: LCB, LCC…
• AUSTENITIC STAINLESS STEEL e.g.: CF8M, CF8C, CF10, CG8M…
• MARTENSITIC STEEL AND FERRITIC MARTENSITE FOR GENERAL SERVICE AND LOW TEMPERATURE e.g.: CA15, CA6NM…
• SUPERAUSTENITIC ALLOYS e.g.: CN7M, CK3MCuN…
• DUPLEX ALLOYS e.g.: S31803, S32760, A890Gr4A, A890Gr5A, A890Gr6A, CD4MCu…
• NICKEL BASE ALLOYS e.g.: INCOLOY 825, MONEL 400, INCONEL 625, CW-6MC, CW-12MW…
NACE MR0103 or NACE MR0175 compliance is a common requirement in sour service applications. Moreover, AMPO POYAM VALVES’ Lift Plug Valve is commonly used in these applications and is compliant to NACE MR0103 and NACE MR0175 requirements in terms of materials.
‘• Available with 70%, 90% and full port designs.
• Bidirectional and optimum performance both in low and high differential pressures.
• Double block and bleed design.
– Top Entry desing for ease of maintenance without removing the valve from the line
– Simple design (integral plug-stem, no gaskets…)
– Guided design to allow a vertical or horizontal installation
– Low operation torque (advanced lift and turn technology).
– No lubrication is required
– Low Steam consumption (flushing is required only during operation)
– Protected seats in the open and closed positions.
– Fire Safe certified according API 6FA
– Low Fugitive Emissions (and Low Emission packing as per API 622)